Skip to main content

Job Opportunity

if interested, pls send ur CV to
 
 
Clients : Marine, Oil & Gas , Shipyard Ind
 
For Singapore:
2 x Sub-contract Executive
6 x QS
4 x Planning Engineer
1 x E&I Drafter ( Lead ) 
1 X Design Engineer ( Need to know how to perform structural design calculation by using STAAD PRO V8i is a must)
3 x Structural Drafter ( 2 x 1 yr contract, and 1 Permanent post)
1 x E&I Drafter Lead
1 x Senior Structural Engineer cum Checker (Section Head) – Degree Holder
1 x HVAC Lead Engineer ( Torrect  )
3 x Project Manager
4 x Construction Manager
2 x Painting Inspector Cum Supervisor
6 x Dimensional Controller 
 
 
For China: ( 1 Yr Contract, Subject to Renewable / convert to Perm )
2 x Safety Supervisor
2 x Structural / Piping Supervisor ( URGENT ) Involved in Fabrication & Installation
2 x Piping Supervisor
4 x QAQC Inspector
1 x Scaffold Supervisor
 
For Malaysia ( Contract or Perm )
Construction Superintendent (Piping/Structure)
·         Supervisor (piping/structure)
·         Safety Supervisor
 
---------------------------------------------------------------------------------------------------------------------
 
 
Civil & Structural Engineer
 
Responsibilities:
 
  • Responsible for leading designer and draftsman for Civil & Structural design requirements of the project
  • Prepare and review drawing, datasheet and specifications for Civil & Structural design
  • Conversant with British codes BSC5950 and BS8110
  • Able to use STAADPRO for the analysis and design of steel and reinforced concrete structures and foundations
  • Knowledge in storm water drainage, roads and pavement design would be an advantage
  • Able to carry out basic design and quantity take-off for project tendering
  • To check steel and RC structures drawings prepared by draftsperson
  • Good team player with good interpersonal skills
  • Willing to travel and visit work site for taking site measurement and for site check
 
Requirements:
 
  • Minimum Degree in Civil & Structural Engineering or related fields of studies
  • Minimum 2 to 5 years relevant working experience
  • Proficient in Microsoft Office applications
  • Proficient in STAADPRO
  • Willing to travel abroad
 
 
 
 
Construction Manager x 4
 
 
·         Report to respective Project Manager.
·         Responsible for all the day to day construction, operational and administration activities at sites.
·         In charge of workers’ relocation (for all trades) / approval and to oversee all skid fabrication projects.
·         Responsible to client and Project Manager for construction as scheduled
·         Responsible for preparation of planning and progress report every week and report to Project Manager and client
·         Monitor progress closely, identify problem areas and initiate action plans and involve Project Manager when necessary
·         Conduct weekly progress meeting with project team
·         Coordinate activities of various disciplines during construction phase
·         Control activities of sub-contractors from the point of view of productivity, safety, regulations, quality and schedule
·         Implement safety and quality systems
·         Keep site discipline at the highest levels
·         Familiar with scope of work as given by the client and as given to sub-contractor for the project
·         Take charge together with Project Manager in planning the overall construction sequence for smooth work implementation.
·         Any other tasks and responsibilities assigned from time to time
 
 
 
Requirement:

·   Diploma in Mechanical Engineering/Offshore Engineering/Production Engineering

  • Min 5  yrs experience as CM or as Construction Engineer.
  • Salary neg
  • Prefer short notice period
Project Manager x 4
 
Your main areas of involvement as Project Manager are as follows:-
·         To be fully aware of company’s ISO standard requirements specified in our QMS and OHSE Manual.
·         To be fully aware of project specifications, safety requirements, scope of work and supply matrix etc.
·         Responsible for the full and safe completion of project in good quality and within the project schedule.
·         Exercise stringent control on project budget given and be responsible to capture any variations / additional claims to clients.
·         Be confident on project management and problem solving.
·         Be prudent when verifying / approving timesheets, purchase requisitions and other project related documents.
 
Additional duties and responsibilities as Project Manager shall include the followings:-
·         Report to General Manager, Operations (GM-O).
  • Responsible for the management of projects as assigned
  • Act and undertake role of engineering coordinator to ensure all engineering drawings are executed as per schedule requirement
  • Coordinate with multi-disciplines and clients during engineering phase to provide technical inputs as much as possible.
  • Represent company to liaise with clients on all matters.
  • Responsible for preparation of project execution plans, review schedules and provides effective feed back to planning department for project monitoring and execution.
  • Monitor and closely coordinate with Procurement of materials.
  • Monitor all engineering and material deliverables from clients.
  • Liaise with Contracts Dept and Project Managers on the selection of sub-contractors.
  • After engineering phase, to supervise the construction team activities for the project.
  • Monitor budget and ensure the project is executed at an optimum cost and on time.
  • Conduct project VSCC meetings.
  • Ensure all relevant documentation are prepared and submitted to QA/QC department.
  • Ensure all construction activities are performed as per stipulated schedule.
  • Ensure HSE standards are complied and followed strictly by sub-contractors.
  • Ensure discipline on board is maintained at all times.
  • Ensure time-keeping and house-keeping by sub-contractors are being complied.
 
Requirements:
·         Singaporean/S’PR, 
·         Diploma/Degree in Engineering with min 3 yrs of experiences as PM or 5 yrs of experience as Construction Manager/Project Engineer.
·         Salary neg
·         Prefer short notice period
 
We have an urgent opening for TLER Packages Lead Engineer, Local/S’PR, salary range S$4,000 to S$5,000 neg for 1 year contract:
 ( KNowledge in HVAC , E&I )
Requirement:
·         Sound knowledge of HVAC Design/Installation
·         At least 3 years relevant experiences
·         At lease Degree holder and able to communicate at all levels
·         Liaise with sub-vendor and client on day to day basis on project issues
·         Make sure documentation/submissions by sub-vendor are carried on time
·         Are to highlight schedule/technical issues related to HVAC
 
 
Civil / Structural Draftsman
 
 Responsibilities:
  • Ability to do shop drawing for structural steel work in AutoCad
  • Drafting of civil works (roads, drainage etc)
  • Drafting of steel and concrete structures
  • Able to liaise with piping, tankage and E&I personnel
  • Able to do material take-off for structural steel work or reinforced concrete works from drawings
 
Rquirements:
  • Minimum 3 to 5 years relevant working experience
  • Certificate or Diploma in Civil/Structural Engineering
  • Competent in using AutoCad for Civil and Structural drafting
  • Candidates with basic knowledge in Architectural Drafting would be an advantage
 
Civil Supervisor / Engineer
 
Responsibilities:
 
  • Responsible for the supervision of civil works on-going at site, ensure timely and smooth progress of work
  • To alert on critical matters to the Project Manger
  • Attend site meetings, prepare work schedules and manpower allocations
  • Review projects specifications, engineering drawings, material requisition, cost control and project supervision
  • Responsible for all aspects of site safety
  • Perform other ad-hoc duties that assigned by the Superior
 
Requirements:
 
  • Minimum 2 to 3 years relevant working experience in Oil and Gas Industry
  • Diploma in Civil Engineering or related field of studies
  • Certified in BCSS would be an added advantage
 
 
 
 
Engineer/Designer (Tankage & Vessel)
 
Responsibilities:
  • Design and drafting of storage tanks, pressure vessels and structures
  • Review engineering documents for statutory submission and for construction
  • Review and implement project specification
  • Execute basic and detailed engineering design including calculations/analysis as per specifications
  • Prepare material take-off for project procurement and bid proposals
  • Provide technical assistance to construction teams
  • Attend site check/verification
 
Requirements:
  • Minimum 3 years relevant working experience for Designer and 5 years for Engineer position
  • Degree/Diploma in Mechanical Engineering or related field of studies
  • Computer literate and hand-on experienced on Microsoft Office, AutoCAD, Tank Software
 
- We are seeking a lower level person, e.g. skilled draftsman or assistant designer with tank/vessel background
 
 
 
 
Draftsman (Process)
 
Responsibilities:
  • Prepare, printing and filing the documents and drawings for submission
  • Prepare product, utility, fire fighting system, slop system, heating facilities and vapor treatment P&ID
  • Involve in Hydraulic calculation, ISO 9001:2000 and instrumentation
  • Review vendor technical specification and perform technical clarification with vendor
 
Requirements:
  • Diploma in Mechanical/ Chemical Engineering or related field of studies
  • Minimum 2 years relevant working experience
  • Hands-on experience on AutoCAD and Smart Plant P&ID
 
 
Mechanical Engineer ( Rotating Design )
 
Responsibilities:
·         Process design for Oil/Gas terminal (Hydraulic calculation, system design, fire fighting system design etc)
·         Evaluation of static/rotating equipment
·         Preparation of equipment list, data sheet, specification, requisition and technical proposal
·         Communicate with vendor
·         Review vendor technical specification and perform technical clarification with vendor
·         Knowledge of equipment selection (pump, loading facilities, fire fighting facilities, environmental protection equipment, etc)
·         Knowledge of the international code and standards (i.e. ASME, API, ANSI, NFPA, IP)
·         Able to read P&ID
·         Able to interface with other engineering discipline
 
Requirements:
  • Degree in Mechanical/ Chemical Engineering or related field of studies
  • Minimum 2 years relevant working experience, fresh graduates are welcome to apply
  • Able to use AutoCAD software and Microsoft Office applications
  • Knowledge of process design would be an advantage
  • Good team player with good interpersonal skills
  • Willing to travel abroad
 
Project Engineer
 
Responsibilities:
 
  • Ensure project works and service quality, goods delivery are in compliance with contractual requirements
  • Schedule works, coordinate, implement and manage projects
  • Project work execution. Ensure timely work progress, taking account the budgeted qualities and cost
  • Develop, maintain and manage working relationships with customers and all related parties
  • Prepare and submit project progress reports and documentations when required
  • Quotation preparation
  • Compiling of data book
  • Review and amendments of drawings
  • Site supervision
  • Any other tasks assigned by the superior
 
Requirements:
 
  • Minimum 2 years experience
  • Minimum Diploma in Civil/Mechanical Engineering  field or others with relevant experience also welcome to apply
  • Preferably Singaporean/PR/Malaysian
  • Knowledge in AutoCad
  • Willing to work at site
 
 
 
QA Engineer
 
·        Reports to Snr Manager/Manager(QA/QC) and or Asst. QA/QC Manager in the absence of HOD
·        Responsible to prepare and conduct Project Specific Quality requirements training to Production Supervisors and Sub-contractors QC Personnel.
·        Responsible for establishing project specific Work Procedures and Instructions.
·        Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
·        Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
·        Liaise with client in relation to Quality on Project Specific audits.
·        Schedule and conduct Project Specific Quality Audit as per agreed Plan.
·        Monitor the issue and close-out of NCR’s for the project and maintain its register.
·        Monitor progressive compilation of the MDR for the project as work progress.
 
QA/QC inspector
·        Responsible to perform Surveillance Inspection to ensure that the construction work is performed and duly meeting the project specific Quality Requirements.
·        Responsible for verification of in process inspection, final inspection and welding.
·        Responsible towards welding control and inspection.
·        Responsible to prepare and maintain Welding Audit Report during construction.
·        Responsible to record result of inspections and maintain records of specific items  as per contract/specifications.
·        Responsible to administer AFI request to Client and 3rd party and coordinate for inspection as identified in the respective discipline ITP.
·        Responsible to raise Non-conformance reports as seen during inspection and follow-up on status of rework and close-out.
·        Responsible to arrange for proper NDT requirements as per specifications.
·        Responsible to interpret RT films pertaining to welding joints.
·        Responsible to review all NDT reports and approval.
·        Responsible to establish and maintain inspection and NDT progress status on weekly basis.
·        Responsible to generate weekly weld rejection rate summary.
·        Responsible to witness all testing activities.
·        Responsible to monitor PWHT.
·        Responsible to attend to all potential quality problems to prevent occurrence of defects.
·        Responsible for preparation of Test Packs for Piping Hydro static testing
·        Responsible for the preparation/compilation of the final punch list prior to delivery of the fabricated and assembled components.
 
 
Cheers
Lynn
 
=====================
When you love your job, you will not have to work for the rest of your life.
Life is too short to be in the wrong job
 
I Plus Q Human Resources Pte Ltd
20 Maxwell Road
#08-01 Maxwell House
Singapore 069311
DID  : (065) 62202473
Mobile : (065) 96784263
URL : www.iplusq.com.sg
Registration No : R1101652
Licence No : 97C4989

Comments

  1. GASCO Recruitment 2012 in Indonesia

    Please share to all aspiring Indonesian candidates

    http://gasco-recruitment-2012-indonesia.blogspot.com/?goback=%2Egde_3063426_member_168195331

    ReplyDelete

Post a Comment

Popular posts from this blog

DOWNLOAD BUKU: THE TRUTH IS OUT THERE KARYA CAHYO HARDO

  Buku ini adalah kumpulan kisah pengalaman seorang pekerja lapangan di bidang Migas Ditujukan untuk kawan-kawan para pekerja lapangan dan para sarjana teknik yang baru bertugas sebagai Insinyur Proses di lapangan. Pengantar Penulis Saya masih teringat ketika lulus dari jurusan Teknik Kimia dan langsung berhadapan dengan dunia nyata (pabrik minyak dan gas) dan tergagap-gagap dalam menghadapi problem di lapangan yang menuntut persyaratan dari seorang insinyur proses dalam memahami suatu permasalahan dengan cepat, dan terkadang butuh kecerdikan – yang sanggup menjembatani antara teori pendidikan tinggi dan dunia nyata (=dunia kerja). Semakin lama bekerja di front line operation – dalam hal troubleshooting – semakin memperkaya kita dalam memahami permasalahan-permasalahan proses berikutnya. Menurut hemat saya, masalah-masalah troubleshooting proses di lapangan seringkali adalah masalah yang sederhana, namun terkadang menjadi ruwet karena tidak tahu harus dari mana memulainya. Hal tersebut

Apa itu HSE ?

HSE adalah singkatan dari Health, Safety, Environment. HSE merupakan salah satu bagian dari manajemen sebuah perusahaan. Ada manejemen keuangan, manajemen sdm, dan juga ada Manajemen HSE. Di perusahaan, manajemen HSE biasanya dipimpin oleh seorang manajer HSE, yang bertugas untuk merencanakan, melaksanakan, dan mengendalikan seluruh program HSE. Program  HSE disesuaikan dengan tingkat resiko dari masing-masing bidang pekerjaan. Misal HSE Konstruksi akan beda dengan HSE Pertambangan dan akan beda pula dengan HSE Migas . Pembahasan - Administrator Migas Bermula dari pertanyaan Sdr. Andri Jaswin (non-member) kepada Administrator Milis mengenai HSE. Saya jawab secara singkat kemudian di-cc-kan ke Moderator KBK HSE dan QMS untuk penjelasan yang lebih detail. Karena yang menjawab via japri adalah Moderator KBK, maka tentu sayang kalau dilewatkan oleh anggota milis semuanya. Untuk itu saya forward ke Milis Migas Indonesia. Selain itu, keanggotaan Sdr. Andry telah saya setujui sehingga disk

Penggunaan Hydrostatic Test & Pneumatic Test

Pneumatic test dengan udara (compressed air) bukan jaminan bahwa setelah test nggak ada uap air di internal pipa, kecuali dipasang air dryer dulu sebelum compressed air dipake untuk ngetest.. Supaya hasilnya lebih "kering", kami lebih memilih menggunakan N2 untuk pneumatic test.. Tanya - Cak Ipin  Yth rekan-rekan milis Saat ini saya bekerja di power plant project, ditempat saya bekerja ada kasus tentang pemilihan pressure test yang akan digunakan pada pipa Instrument, Pihak kontraktor hanya melakukan hydrostatic test sedangkan fluida yg akan digunakan saat beroperasi adalah udara dimana udara tersebut harus kering atau tidak boleh terkontaminasi dengan air, pertanyaan saya : 1. Apakah boleh dilakukan hydrostatic test pada Instrument air pipe?? 2. Jika memang pneumatic test berbahaya, berapa batasan pressure untuk pneumatic test yg diijinkan?? Mohon pencerahan dari para senior, terima kasih. Tanggapan 1 - Apriadi Bunga Cak Ipin, Sepanjang yang saya tahu, pneum