Kontak

Silahkan hubungi kami untuk posting lowongan kerja maupun keperluan lainnya melalui email ke aladas.diatna[at]gmail.com

33 comments:

  1. admin, please posting this offering.

    Dear Professionals,


    Advanced Engineering company in Saudi Arabia (www.aeng.com.sa) is seeking some professionals to fill vacant positions for their new project. See below table for vacant positions and experience required:

    Technical Background Experience
    in years

    1 Project Manager Civil 12

    2 Project Manager Mechanical 12

    3 Project Manager Electrical 12

    4 Planning Engineer Mechanical or Civil 8

    5 Auto Cad (designer) 7

    6 Project Engineer Civil 7

    7 Project Engineer Mechanical 7

    8 Project Engineer Electrical 7

    9 Supervisor Civil 10

    10 Supervisor Mechanical 10

    11 Supervisor Electrical 10

    12 QA-QC Civil 10

    13 Safety officer 10

    14 Cost Estimator Civil or Mec. 10

    15 Labor 10

    16 Mason 10

    17 Steel Fixer 10

    18 Carpenter 10

    19 Electrician 10

    20 Plumber 10



    Others Requirements:
    1. For engineering positions (no. 1,2, 3, 4, 6, 7, & 8) should be bachelor degree majoring in engineering and the rest could be diploma.
    2. Applicants should have minimum experience as stated on table above.
    3. Proficient in English both written and spoken (It will be Mandatory).

    Company provide attractive remuneration packaged as shown on below table:
    Benefits for Professional level :
    1 Housing # 3 Basic
    2 Medical # covered
    3 Family Status # covered
    4 Transportation # covered
    5 Salary # Negotiable
    6 Umrah # every 1 Year
    7 Hajj # Every 5 Year with 1 other family member
    8 Bonus # 3 or 4 month salary (Every 1 years)

    Benefits for Para Professional level :
    1 Housing # Company provide
    2 Medical # covered
    3 Family Status # NO
    4 Transportation # covered
    5 Salary # Negotiable





    Please forward this email to anyone that suitable for any above positions.


    Below is Walking Interview schedule:
    Date : 23 - 27 May 2012
    Time : 08:00 - 16:00 WIB
    Venue : Bussiness Center,
    Hotel Pullman Jakarta( Formerly Hotel Nikko Jakarta )

    Jl. MH Thamrin No. 59 Jakarta
    Tel :(+62)21-31921111

    Please bring your update CV, photograph 3x4 (3pcs), copy passport.

    Refrence: Ean Fadhila / Mr. Ayman

    ADVANCED Engineering,
    Jubail - 31952
    Saudi Arabia.
    Mob : +966 563355566
    Off : +966 3 3619111
    Fax : +966 3 3614751
    ab@aeng.com.sa
    www.aeng.com.sa


    Thanks & Regards,
    ksa_vacancy@yahoo.com

    ReplyDelete
  2. untuk bejana tekan dan pipa apakah ada peraturan yang mengharuskan harus diuji kembali untuk waktu tertentu?

    ReplyDelete
  3. Save your time, save your money...

    Trust we to get your S K T M I G A S

    Call me for more information and consultation :

    CV. A F I T A Consultant

    ”The Best Solution for Business”

    Griya Permata, Blok B No.5, Cibubur

    Telp.021-8225833 / 021-96948432 / 021-8202573

    http://afitaconsultant.weebly.com


    For fast respone, call:
    Fifi Hp. 087882070022 / 081280317176


    PROSEDUR PERMOHONAN SKT MIGAS
    • Penyedia Barang dan Jasa (Perusahaan) mengajukan permohonan & surat pernyataan kepada Dirjen Minyak dan Gas Bumi Up. Direktur Teknik dan Lingkungan Migas beserta Surat Pernyataan.
    • Penyedia Barang dan Jasa (Perusahaan) menghadiri undangan sosialisasi yang diadakan oleh pihak Migas. (Bisa diwakilkan oleh pihak AFITA Consultant)
    • Penyedia Barang dan Jasa (Perusahaan) harus menghadiri presentasi yang diadakan oleh pihak Migas.
    • Pihak Migas atau Isntansi terkait yang ditunjuk akan melakukan Survey ke lokasi perusahaan untuk melakukan Pemeriksaan dan Verifikasi data perusahaan sesuai permohonan yang diajukan perusahaan
    • Jika Hasil Pemeriksaan & Verifikasi data perusahaan memenuhi persyaratan maka Dirjen Migas cq. Direktur Teknik dan Lingkungan Migas akan mengeluarkan Surat Keterangan Terdaftar Migas.

    Semua prosedure bisa di lewati, proses cepat 3 hari setelah dokument lengkap.

    ReplyDelete
  4. We are Falcon Multi Services, a Multinational Accreditted Training Center for IWCF and IADC course which located in Jakarta, Mumbay, Bahrain,Manila,Kuala Lumpur, Kuwait, Oman.

    Further information and registration, please contact our Jakarta center at :

    FALCON MULTI SERVICES LTD
    11th Mayapada Tower, Jl. Jendral Sudirman, Jakarta
    Phone : +62 21 5289 7389 (hunting )
    Email : bdm1@falconmsl.com
    Web page : www.falconmsl.com

    ReplyDelete
  5. CV. DEWATA TECHNOINDO menyediakan penangkal petir elektrostatis jenis NEOFLASH, yang berguna untuk melindungi bangunan dan alat elektronik di dalam bangunan anda. kunjungi website kami www.antipetir.com atau http://antipetir.asia/ untuk bisa berbicara secara online atau hubungi kami di 021-45525000 atau 021-45521000, kami akan memberikan solusi terbaik mengenai penangkal petir untuk bangunan anda. kami tunggu kunjungan anda...

    ReplyDelete
  6. PT. TOP TRANS CARGO
    Door to Door Services Int'l & Domestic

    TOPTRANS, provide full support for Oil & Gas Shipment
    in Door to Door System International & Domestics

    PT. TOP TRANS CARGO
    Jl. Jend A. Yani No. 2
    Komp. Perkantoran Pulomas Satu Gedung IV, Lt. 2
    No. 11, Jakarta - Indonesia
    Tel : +622133992421, +62214714789
    Fax : info@toptrans-cargo.com
    Web : www.toptrans-cargo.com
    Mobile : +6281311538999 / 292D8AD8
    +6285715173999 / 31286DB9

    ReplyDelete
  7. http://gasengine.co.in

    Gas Engine

    Cummins Gas Engine CCEC

    Natural Gas Genset , Gas Engine

    email:

    gasengine@gasengine.co.in

    gasengine@in.com

    ReplyDelete
  8. http://gasengine.co.in

    Gas Engine

    Cummins Gas Engine CCEC

    Natural Gas Genset , Gas Engine

    email:

    gasengine@gasengine.co.in

    gasengine@in.com

    ReplyDelete
  9. Dear bapak/ibu moderator, mohon ijinnya untuk meneruskan lowongan ini di milis migas Indonesia ini. Terima kasih banyak sebelumnya.

    PT. YAMA Engineering, a rapid growth Indonesian Engineering and Construction company in the oil and gas services, currently working for several oil and gas projects and its investment projects in Indonesia and now looking for several high calibre and strong motivated candidates as follows:

    1. Fresh graduate multi discipline (Chemical Engineering, Physic Engineering, Electrical Engineering, Mechanical Engineering, Civil/structure engineering) graduated from ITB, UI, UNPAR, ITS, UNS, TRISAKTI, UNDIP, UGM.

    2. Junior discipline engineer with minimum 5 years working experiences as discipline engineer on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project (Piping/stress Engineer, Pipeline Engineer, Process Engineer, Instrument Engineer, Electrical Engineer, Civil/structure engineer, Mechanical Static/tankage/vessel Engineer, Mechanical Rotating engineer, Process safety engineer).

    3. Senior discipline engineer with minimum 10 years working experiences as discipline engineer on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project (Piping/stress Engineer, Pipeline Engineer, Process Engineer, Instrument Engineer, Electrical Engineer, Civil/structure engineer, Mechanical Static/tankage/vessel Engineer, Mechanical Rotating engineer, Process safety engineer).

    4. Project engineer with minimum 15 years working experiences and 5 years working experiences as project engineer/interface engineer on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    5. Project Manager with minimum 20 years working experiences and 10 years working experiences as project Manager on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    ReplyDelete
  10. Dear bapak / ibu moderator, mohon ijinnya untuk meneruskan lowongan ini di milis migas Indonesia ini. Terima kasih banyak sebelumnya.

    PT. YAMA Engineering, a rapid growth Indonesian Engineering and Construction company in the oil and gas services, currently working for several oil and gas projects and its investment projects in Indonesia and now looking for several high calibre and strong motivated candidates as follows:

    1. Construction Manager with minimum 20 years working experiences and 10 years working experiences as construction Manager on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    2. Project service/control engineer with minimum 10 years working experiences as project service/control engineer on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    3. Project scheduler with minimum 10 years working experiences as project scheduler on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    4. Cost control engineer with minimum 10 years working experiences as project cost control engineer on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    5. Discipline drafter with minimum 10 years working experiences as discipline drafter on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project, and property project (Piping, Pipeline, Process, Instrument, Electrical, Civil/structure, Mechanical, Process).

    6. Discipline designer with minimum 20 years working experiences with 10 years working experiences as discipline designer on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project, and property project (Piping, Pipeline, Process, Instrument, Electrical, Civil/structure, Mechanical, Process).

    7. Inspector with minimum 10 years working experiences as inspector on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project, and property project (Welding, painting, Instrument, Electrical, Civil/structure, Mechanical tankage/vessel/rotating). inspection certificate is mandatory.

    8. Project/contract administrator with minimum 10 years working experiences as project/contract administrator on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project, and property project.

    General requirement:
    1. Fluent written and spoken english and Bahasa Indonesia.
    2. Hard Working, self motivated, ability to work independent or in a group, loyal, honest, problem solver, cost concious, strong nationalism.
    3. Willing to work all around Indonesia.
    4. Ages: less than 25 years for fresh graduate.

    Application letter (including proposed position), encl with complete CV, foto, and related certificates shall be sent to PT. YAMA Engineering,
    attn: Human Resources Dept. recruitment@yamaengineering.co.id

    NOT LATER THAN 24 JANUARY 2013.

    ReplyDelete
  11. Dear bapak/ibu moderator, mohon ijinnya untuk meneruskan lowongan ini di milis migas Indonesia ini. Terima kasih banyak sebelumnya.

    PT. YAMA Engineering, a rapid growth Indonesian Engineering and Construction company in the oil and gas services, currently working for several oil and gas projects and its investment projects in Indonesia and now looking for several high calibre and strong motivated candidates as follows:

    1. Fresh graduate multi discipline (Chemical Engineering, Physic Engineering, Electrical Engineering, Mechanical Engineering, Civil/structure engineering) graduated from ITB, UI, UNPAR, ITS, UNS, TRISAKTI, UNDIP, UGM.

    2. Junior discipline engineer with minimum 5 years working experiences as discipline engineer on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project (Piping/stress Engineer, Pipeline Engineer, Process Engineer, Instrument Engineer, Electrical Engineer, Civil/structure engineer, Mechanical Static/tankage/vessel Engineer, Mechanical Rotating engineer, Process safety engineer).

    3. Senior discipline engineer with minimum 10 years working experiences as discipline engineer on EPCI oil and gas project, petrochemical project, power plants project, pulp and paper project (Piping/stress Engineer, Pipeline Engineer, Process Engineer, Instrument Engineer, Electrical Engineer, Civil/structure engineer, Mechanical Static/tankage/vessel Engineer, Mechanical Rotating engineer, Process safety engineer).

    4. Project engineer with minimum 15 years working experiences and 5 years working experiences as project engineer/interface engineer on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    5. Project Manager with minimum 20 years working experiences and 10 years working experiences as project Manager on EPCI oil and gas project, petrochemical projects, power plants project, pulp and paper project.

    General requirement:
    1. Fluent written and spoken english and Bahasa Indonesia.
    2. Hard Working, self motivated, ability to work independent or in a group, loyal, honest, problem solver, cost concious, strong nationalism.
    3. Willing to work all around Indonesia.
    4. Ages: less than 25 years for fresh graduate.

    Application letter (including proposed position), encl with complete CV, foto, and related certificates shall be sent to PT. YAMA Engineering,
    attn: Human Resources Dept. recruitment@yamaengineering.co.id

    NOT LATER THAN 24 JANUARY 2013.

    ReplyDelete
  12. Dear Bapak/Ibu Admin,

    Saya ingin bertanya terkait dengan Migas.
    Saya mendapat tawaran interview di PT. Pertamina Patra Niaga, tapi saya belum mendapatkan informasi mendetail tentang kesejahteraan di perusahaan ini.

    Mohon bantuan informasinya terkait kesejahteraan karyawan di perusahaan ini, terutama gaji dan tunjangan.

    terima kasih.

    ReplyDelete
  13. Dear bapak/ibu moderator, mohon ijinnya untuk meneruskan lowongan ini di milis migas Indonesia ini. Terima kasih banyak sebelumnya.

    WELDING ENGINEER
    PT. Citra Panji Manunggal
    Qualified for:
    • Preparation of all things related to the welding process, such as WPS / PQR, welder qualification and joint design.
    •Determinants problems solving in the welding process
    •Witness in a welder qualification and welder operator.
    •Supervise Welding inspector of the work welding process or Welding activities.
    •Prepare a NDE request in accordance NDE plan and monitor all activities related.
    •Control and Maintain of Welding Repair Rate.
    •Ensuring the Welding Inspector and Welder Performance are competent in the field of welding.
    •Related with other departments in the obligation to carry out inspections in the welding process.
    Requirements:
    •S1 graduate of Industrial Engineering or Science & Technology or equivalent.
    •Certified International for Welding Engineer and Experience Minimum 3 Years
    •Experience as Welding Inspector.
    •Health physically and mentally, not color blind.
    •Expert communicate verbally and writing in English.
    •Ready to be assigned in the Project Site Area.

    The candidate Interested can send detailed resume via online :
    rial_1542@yahoo.com /
    robi_fedora@yahoo.com
    Or Contact to :
    PT. Citra Panji Manunggal
    Podok Pinang Center Blok A 08-12
    Jl. Ciputat Raya, Jakarta 12310 Indonesia
    (021) 7653723 / 7658806
    Att To:
    Manager QA/QC:
    S. Jesson


    Terimakasih

    ReplyDelete
  14. mohon maaf moderator, mau tanya.
    kalau mau mengajukan pertanyaan kepada yang lain caranya bagaimana??
    terima kasih

    ReplyDelete
  15. Dear bapak / ibu moderator, mohon ijinnya untuk meneruskan lowongan ini di milis migas Indonesia ini. Terima kasih banyak sebelumnya.

    PT. YAMA Engineering, a rapid growth Indonesian Engineering and Construction company in the oil and gas services, currently looking for SITE MANAGER to handle project in Gresik.

    General requirement:
    1) Have minimum 8 years experiences as a Site Manager in Oil and Gas Company or EPCI Company.
    2) Have a working knowledge of applicable industry practices and shall have been responsible for at least two (2) major oil and gas EPC projects within the last seven (7) years.
    3) Fluent written and spoken English and Bahasa Indonesia.
    4) Hard Working, self motivated, ability to work independent or in a group, loyal, honest, problem solver, cost conscious and strong nationalism.
    5) Willing to work all around Indonesia.
    Application letter (including proposed position), encl with complete CV, foto, and related certificates shall be sent to PT. YAMA Engineering,
    attn: Human Resources Dept. recruitment@yamaengineering.co.id
    NOT LATER THAN MAY, 7th, 2013

    ReplyDelete
  16. Dear bapak / ibu moderator, mohon ijinnya untuk meneruskan informasi ini di milis migas Indonesia, mungkin ada yang membutuhkan. Terima kasih banyak sebelumnya.

    Dengan Hormat,
    Bersama ini perkenankan Kami PT. Dynamics Circuit Indonesia selaku authorized service centre untuk peralatan test buatan : Megger Limited, AVO International USA, Programma Sweden, Amtech India, KKS Switzerland, dan BK Instruments USA bermakud untuk mengajukan perkenalan perusahaan kami dengan bidang perbaikan peralatan elektronik sebagai berikut :
    1. Perbaikan peralatan test elektrikal berbagai merek. Pada saat ini kami adalah Authorized Service Centre untuk alat test buatan Megger UK, AVO International USA, Programma Sweden, Amtech India, KKS Switzerland, dan BK Instruments USA
    2. Perbaikan printed circuit board
    3. Perbaikan Semiconductor & Industrial Electronic Equipment
    4. Perbaikan Medical Electronic Equipment
    5. Perbaikan Barang barang elektronik lainnya
    6. Perbaikan Power supplies

    PT. Dynamic Circuit Indonesia sendiri merupakan cabang dari perusahaan Dynamics Circuit (S) PTE LTD yang sudah bertahun tahun secara profesional menjalankan bisnis ini di Singapura, Malaysia dan Vietnam. Secara umum, kami memperbaiki dan memperbaharui berbagai papan sirkuit (PCB) dan peralatan listrik lainnya. Dan Kami sendiri mengkhususkan diri dalam bidang Listrik, energi, Semiconductor, Industri dan Medis elektronik.

    Keuntungan Menggunakan Jasa Kami adalah :

    1. Kami sudah profesional di bidang ini selama bertahun tahun
    2. Kami sebagai authorized service centre untuk peralatan test elektrikal produk produk alat test elektrikal ternama
    3. Harga yang sangat kompetitif
    4. Bergaransi

    Demikian Surat perkenalan ini Kami sampaikan, jika ada pertanyaan dan kebutuhan informasi jangan segan segan untuk menghubungi kami ke :

    PT. DYNAMICS CIRCUIT INDONESIA
    Jl. P. Tubagus Angke No.10 Blok C7 Lt. 1, Proyek Jelambar Center
    Tel : 021 – 2954 1370
    Fax : 021 – 2954 1370
    Attn : Bp. Adi Wahyu Setiawan, ST (Service Manager)
    Mobile : 0818 0888 6600

    Atas perhatian dan kerjasamanya Kami ucapkan terima kasih

    ReplyDelete
  17. DEAR ALL,

    Dear bapak / ibu moderator, mohon ijinnya untuk meneruskan informasi ini di milis migas Indonesia, mungkin ada yang membutuhkan. Terima kasih banyak sebelumnya.

    on 24 September 2012, I and my colleagues join with project-Abu Dhabi shah gas gathering for jobs in Cladtek (cladding) Batam Indonesia. We placed as client representative for Tecnicas Reunidas Spayol, through the agency TUV-reinland Spain and Xylemco Thailand. Payroll system was closed 30 days every month, for example salaries in september, will be paid for the month of november. After completed our contract on the 9th may 2013, our salaries for the month of March 2013, April 2013 and May 2013, HAS NOT BEEN PAID TILL NOW. We are still waiting.
    to all friends who workers in the oil and gas sector, our advice, beware of the agent / outsourcing named XYLEM.Co from Thailand. Also very surprising certifying body as big as TUV still acts the same as the mafia as XYLEM.Co from Thailand. Thank you for publishing my writing, and if acceptable please suggesting what steps we should take.



    Migas Workers at Batam Island.

    ReplyDelete
  18. Mohon Informasi perusahaan apa yg menjual aalat di bawah ini :

    4 set. EMERSON 475 HART FIELD COMMUNICATOR
    1 SET. F&R EQUIPMENT 750 ADM.MK2
    1 SET. KAMOS NITROGEN TEST EQUIPMENT TYPE 200500

    Atas info serta jawabannya kami tunggu di email kami :
    irambe21@gmail.com
    riakencana@yahoo.com

    terima kasih sebelumnya

    ReplyDelete
  19. Mohon bantuan informasi dimana bisa ambil kursus diving for industrial purpose (underwater welding) dengan sertifikasi IMCA.

    Saya tunggu bantuan informasinya di:

    nisak75@hotmail.com

    Terima kasih

    ReplyDelete
  20. Dear Rekan Migas

    Mohon info, sekiranya ada rekan Migas yang punya pengalaman terkait pendirian Laboratorium Uji & Analisa Survey Migas. Mohon share infonya :
    - Persyaratan apa saja yang dibutuhkan
    - Permit apa saja yang diperlukan untuk dapat beroperasi di
    Indonesia.

    Atas sharing infonya saya ucapkan terima kasih

    Hormat Saya

    Darwin

    ReplyDelete
  21. Tawada CleanTech is your one stop solution to green technology and green building. Increase employee productivity, saves on energy and create healthier working environment with green technologies by Tawada CleanTech.

    Contact us at
    Tawada CleanTech
    www.tawadacleantech.com
    or marketing (at) tawadacleantech (dot) com
    or 021 5794 1139 to speak with one of our green engineer

    ReplyDelete
  22. Saya mau pasang iklan di website anda. Saya pengagum website ini. Sekarang profesi saya adalah menjadi pembuat senapan sniper (angin)
    Bagaimana tata caranya? Mohon info..
    Tks (xlbatu@ gmail.com

    ReplyDelete
  23. Saya ingin mengajukan kerjasama untuk import borongan khususnya dari Singapore.

    Melayani pengiriman baik via udara dan laut, partai kecil sampai partai besar.

    Harga akan semakin murah bilamana pengiriman semakin banyak/besar/berat.

    Untuk negosiasi harga silahkan langsung hubungi.

    Abbas
    081937344399

    Anugerah Batam Ekspress Logistik (ABEL CARGO)
    Taman Raya Tahap 3 No.1 Batam Center
    PH/FAX : 0778 – 7495472
    Website : http://abelcargo.com

    ReplyDelete
  24. Selamat Pagi!

    Berikut Invitation untuk 5 hari Training Course “API 579 : Fitness For Service Course” taking place at BANDUNG, Indonesia from 25 – 29 November 2013.
    Appreciate your assistance to shared with your colleagues.

    Trainer : Mr. Mandar Mulay
    • 18 years’ hands on experience in Design, construction and integrity assessment of Pressure Vessels, Storage Tanks, Piping Systems etc. He is well conversant with the major industry codes & standards such as ASME B 31.1, B31.3 , B31.4 and B31.8, ASME Sec VIII, API 579, ASME PCC-2 etc.
    • Major projects closely associated with, in his professional career so far are, Qatar Chemicals, Shell, Castrol India, Reliance Industries, Cargill USA, etc. His proficiency in Tanks, Piping and pressure vessel codes enables him to trace the similarities and differences of these codes.
    • Has been our recommended instructor for API courses in Petronas Carigali KLCC.

    Please reserve early since I still have seats available and early bird discount. So far we already got participants registered from Petronas Sarawak Operation, Medco Energi, Premier Oil and Petrochina.
     Standard Price : SGD 2,995
     Early Bird : SGD 2,795 before 25th October 2013
     Group Disc : SGD 2,695/delegate (min. 3 participants)

    Just enquiring if you will be looking at this program just for yourself or your colleagues as well.
    Please let me know if you need further assistance.

    Petrosync Upcoming Courses :
    • API 579 - Fitness For Service: 25-29 November 2013, Bandung Indonesia
    • API 510 Pressure Vessel Inspection and Preparation for Certification : 2-6 December 2013, Kuala Lumpur Malaysia ( Based on Request of Petronas GTS Kuala Lumpur )

    Thank you and look forward onto your participation.

    Visit Our FB for updated news, events, and pictures : https://www.facebook.com/pages/PetroSync/132058330174188

    Best Regards,
    Peter
    PetroSync (Singapore)
    28B Circular Road
    Singapore 049384

    Office: +65 6415 4500 | Fax : +65 6826 4322 | BB : 277C6DCD | Whatsapp : +62 85715768283
    Email: peter@petrosync.com | Website: www.petrosync.com
    Synchronize Your Petroleum Skills!

    ReplyDelete
  25. Dengan Hormat,,,
    Perkenalkan kami PT. Hokkindo Jaya Mandiri. Kami adalah perusahaan Jasa
    Import specialist dalam bidang Jasa Undername Dan Customs Clearance di Kepabeanan baik area Bandara maupun Pelabuhan di seluruh Nusantara, maka dengan ini kami menawarkan jasa pengurusan pabean dan transportasi barang sampai ke tempat tujuan :

    1. IMPORT UDARA DAN LAUT
    2. PENGURUSAN IMPORT DOOR TO DOOR ( RESMI )
    3. CUSTOMS CLEARANCE ( PENGURUSAN IMPORT DI KEPABEANAN )
    4. HANDLING IMPORT BORONGAN ( ALL-IN )
    5. UNDER NAME ( CONSIGNEE ) / QQ

    Lisensi Import PT. Hokkindo Jaya Mandiri Adalah :

    - N P W P
    - A P I-U
    - S R P/N I K
    - N P I K
    - IT Elektronik
    - IT BESI / BAJA ,LS, SNI

    6. HANDLING IMPORT RESMI
    7. TRUCKING

    BAB (HS) Hokkindo :

    - BAG VII (HS NO.3901 s/d 4017) =>> Plastik
    - BAG XV (HS NO.7202 s/d 8311) =>> Besi Dan Baja

    - BAG XVI (HS NO.8401 s/d 8548) =>> Mesin Dan Bagian Nya

    - BAG XX (HS NO.9401 s/d 9619) =>> Furniture Dan Perlengkapan

    KEMUDAHAN UNTUK PENGURUSAN IMPORT:
    Kami memiliki izin dan alat transaksi data dengan Bea dan Cukai
    ( NPPJK) Nomor Pokok Pengurusan Jasa Kepabeanan dan ( EDI) Electronic Data
    Interchange/ Pembuatan Document PIB ( Pemberitahuan Import Barang )

    Note :
    1. Kami mempunyai Agent di beberapa negara Eropa,Asia dan America,sehingga
    kami bisa mengerjakan import ex work,Dan FOB.
    2. Mengeluarkan Faktur Pajak Standar
    3. Kami mempunyai kantor cabang di Surabaya, Kalimantan Dan Medan

    Demikianlah permohonan dari kami, atas perhatian dan kerjasamanya kami
    ucapkan Terima kasih.


    PT.Hokkindo Jaya Mandiri


    R A N D I
    0821 1027 9721
    BB: 2A50FB07


    PT. HOKKINDO JAYA MANDIRI
    Graha Sartika Jl. Dewi Sartika No. 357 Cawang Jakarta 13630
    P : +62(21) 8087 1390 (Hunting)
    F. : +62(21) 8087 1470
    Mobile : 082110279721
    www.hokkindo.com
    E-mail : hokkindo@yahoo.co.id
    E-mail : randihokkindo@gmail.com

    ReplyDelete
  26. Dear Admin Milis Migas,

    Dengan hormat mohon diganti email address untuk keanggotaan saya di milis dari abarehan@gmail.com ke andi.wijaya.ci@gmail.com

    Terima kasih,
    Andi

    ReplyDelete
    Replies
    1. Mas cara register member milis bagaimana ya? Terimakasih

      Delete
  27. Gimana caranya menjadi anggota di sini ya, saya udah cari2 tapi gak ketemu caranya

    ReplyDelete
  28. Dear Milis Migas,

    Sebelumnya perkenalkan saya Ellan, Saya bekerja sebagai barge admin selama kurang lebih 7 tahun untuk offshore construction company, Saya pernah terlibat dalam beberapa Offshore construction project lokal maupun overseas seperti pipeline, Jacket installation, Platform installation dan commisioning, Saya mempunyai latar belakang pendidikan D3 Management Logistik (STMT-Trisakti) tetapi suatu hari saya jumpa dengan orang Indonesia di Dragon Oil platform di Caspian sea dia sebagai SPV Slickline opr dan saya sangat tertarik ingin menjadi slickline operator, Dari sedikit info mengenai saya di atas saya ada beberapa pertanyaan seperti di bawah ini :

    1. Apakah untuk mengikuti training slickline / Wireline operator background pendidikannya harus teknik, Di karenakan background pendidikan saya adalah D3 Management.

    2. Apa perbedaan Slickline dengan wireline.

    3. Mohon info untuk tempat training untuk menjadi Slickline / Wireline operator di Indonesia Khususnya Jabodetabek.

    Salam

    Ellan

    Mohon info mengenai pertenyaan saya di atas.

    ReplyDelete
    Replies
    1. Salam mas, perkenalkan nama saya yepta. Saya juga d3 mesin undip baru lulus tahun lalu. Kebetulan saya juga tertarik sama slickline/wireline. Tapi nyari lowonganya susah. Hehe

      Setau saya kalo wireline lebih elektrikal mas dari slickline. Lalu kalo wireline cangkupan jobnya juga lebih luas, hampir sama kaya coiled tubing mas. (Silahkan dikoreksi kalau salah)

      Bila ada temen temen disini yang punya info slickline/wireline silahkan dishare. :)

      Delete
  29. Bapak-bapak dan Ibu-ibu semuanya,, saya mau tanya,, saya punya drawwork yang pada bagian labusnya terdapat crack.. apakah bisa merepair drum drawwork di bagian labus menggunakan cara welding? kalo bisa,, standar apa yg memperbolehkan mengingat pada labus drum drawwork bukan hasil lasan.
    Terima kasih

    ReplyDelete
  30. Dengan Hormat,
    Bersama ini perkenankan Kami PT. Dynamics Circuit Indonesia selaku authorized service centre untuk peralatan test buatan : Megger Limited, AVO International USA, Programma Sweden, Amtech India, KKS Switzerland, dan BK Instruments USA bermakud untuk mengajukan perkenalan perusahaan kami dengan bidang perbaikan peralatan elektronik sebagai berikut :
    1. Perbaikan peralatan test elektrikal berbagai merek. Pada saat ini kami adalah Authorized Service Centre untuk alat test buatan Megger UK, AVO International USA, Programma Sweden, Amtech India, KKS Switzerland, dan BK Instruments USA
    2. Perbaikan printed circuit board
    3. Perbaikan Semiconductor & Industrial Electronic Equipment
    4. Perbaikan Medical Electronic Equipment
    5. Perbaikan Barang barang elektronik lainnya
    6. Perbaikan Power supplies

    PT. Dynamic Circuit Indonesia sendiri merupakan cabang dari perusahaan Dynamics Circuit (S) PTE LTD yang sudah bertahun tahun secara profesional menjalankan bisnis ini di Singapura, Malaysia dan Vietnam. Secara umum, kami memperbaiki dan memperbaharui berbagai papan sirkuit (PCB) dan peralatan listrik lainnya. Dan Kami sendiri mengkhususkan diri dalam bidang Listrik, energi, Semiconductor, Industri dan Medis elektronik.

    Keuntungan Menggunakan Jasa Kami adalah :

    1. Kami sudah profesional di bidang ini selama bertahun tahun
    2. Kami sebagai authorized service centre untuk peralatan test elektrikal produk produk alat test elektrikal ternama
    3. Harga yang sangat kompetitif
    4. Bergaransi

    Demikian Surat perkenalan ini Kami sampaikan, jika ada pertanyaan dan kebutuhan informasi jangan segan segan untuk menghubungi kami ke :

    PT. DYNAMICS CIRCUIT INDONESIA
    Jl. P. Tubagus Angke No.10 Blok C7 Lt. 1, Proyek Jelambar Center
    Tel : 021 – 2954 1370
    Fax : 021 – 2954 1370
    Attn : Bp. Adi Wahyu Setiawan, ST (Service Manager)
    Mobile : 0818 0888 6600

    Atas perhatian dan kerjasamanya Kami ucapkan terima kasih

    ReplyDelete